Pump and Valve Spares for Fire Protection Systems

Fire protection equipment has its own sealing problems:

• Fire pumps that stand idle between tests, so packing dries out and seal faces can stick
• Gland packing that is meant to weep slightly but is often over-tightened during maintenance
• Jockey pumps cycling often to maintain pressure, wearing their seals faster
• Alarm, deluge and hydrant valves whose seat seals and diaphragms age over years
• Flanged and grooved pipework joints that weep after pressure tests
• Foam system components where the seal must suit the foam concentrate

These product families are commonly enquired about in this sector. Open any page for sizes, materials and buying options.

• Compression Packing: Packing for fire pump glands and valves.
• Mechanical Seals: Seals for jockey and main fire pumps where fitted.
• Pumps and Pump Spares: Spares for fire pump sets.
• Valves and Valve Spares: Spares for alarm, isolation and hydrant valves.
• Ring and Full-face Gaskets: Flange gaskets for fire main pipework.
• Rubber Gaskets and Elastomer Products: Moulded rubber parts and diaphragms.
• Hoses and Fittings: Hoses and fittings for test and drain lines.

You can also browse all product categories or the online shop, where products are being added.

Fire systems are designed and maintained to applicable standards and to the requirements of the system designer, the authority having jurisdiction and the insurer. Replacement parts should match what the system specifies. Parts for fire systems require technical review and the correct certification documents, and we will not substitute a part where the specification does not allow it. Material notes are typical only; always confirm against the manufacturer's data for your application.

Information that speeds up a correct recommendation:

• Pump or valve make, model and serial number
• Original part numbers from the manufacturer's parts list
• System type: sprinkler, hydrant, deluge or foam
• Documentation required by your designer, authority or insurer

Send the nameplate photo and the manufacturer's part numbers wherever possible. Measured packing cross-section and shaft size help with gland packing. Every fire-system enquiry goes to technical review so the right part and paperwork can be confirmed.

You can also use find my seal, upload a drawing, or see how our technical support works.

Fire system contractors usually work to scheduled inspections, so quoting parts ahead of each service visit avoids delays. We quote per enquiry and confirm availability and documentation before you order. Our on-site technical support page explains when call-outs may be arranged, with availability confirmed per enquiry.

Globseals offers three ways to buy: buy online where a confirmed price is shown, request a quote for custom, bulk or unpriced items, or ask for technical review when identification is unresolved. Call 011 079 6033, WhatsApp 079 508 0989 or email info@globseals.com.