Bedfordview, Johannesburg+27 79 057 6815+27 78 336 3011

Cosmetics production

Seals and O-rings for Cosmetics and Personal Care Manufacturing

Creams, lotions, shampoos, fragrances and toiletries are made in vacuum emulsifying mixers, heated kettles and hygienic transfer systems, then filled on high-speed lines. Seals face oils, fragrances, alcohols and frequent cleaning, and product-contact parts must be suitable for the product. Globseals helps production and maintenance teams source mechanical seals, O-rings, PTFE seals and pump and valve spares.

  • Mixer and homogeniser seals
  • Piston filler O-rings
  • Fragrance-resistant compounds
  • Product-contact review
Seals and O-rings for Cosmetics and Personal Care Manufacturing

Sealing challenges in cosmetics and personal care manufacturing

Typical sealing challenges in cosmetics manufacturing include:

  • Essential oils, fragrances and alcohols that swell or extract some elastomers
  • Silicone-based formulations that can attack silicone seals
  • Vacuum emulsifying mixers and in-line homogenisers with seals working under vacuum and shear
  • Viscous creams and gels in lobe pumps and piston fillers that wear O-rings
  • Frequent cleaning and sanitising between batches and colours
  • Purified water systems feeding production, with their own pump and filter seals

Relevant product families

These product families are commonly enquired about in this sector. Open any page for sizes, materials and buying options.

You can also browse all product categories or the online shop, where products are being added.

How to select the right part

Formulation chemistry decides the elastomer: FKM, EPDM, PTFE-based or other compounds are typically considered depending on oils, fragrances and cleaning agents. These are typical starting points only; always confirm against the manufacturer's data for your application.

Seals in contact with cosmetic product require technical review and the correct certification documents, in the same way as food-contact or pharmaceutical parts. Tell us at enquiry which parts touch the product.

Information that speeds up a correct recommendation:

  • Product type and key ingredients (oils, fragrances, alcohols, silicones)
  • Cleaning and sanitising agents
  • Mixer, pump or filler make and model
  • Whether the part is in product contact

Technical and identification support

For fillers and mixers, the machine make, model and serial number usually identify the parts. Where O-rings swell or crack quickly, send a photo and the product details so the compound can be reviewed through seal selection and application engineering.

Useful starting points are find my seal for dimension searches, upload a drawing for drawings and photos, and our technical support page.

Procurement and ordering

Changeover-heavy plants benefit from O-ring and seal kits per machine. We can quote kit lists and discuss supply agreements for repeat items. Availability and documentation are confirmed per enquiry.

Globseals offers three ways to buy: buy online where a confirmed price is shown, request a quote for custom, bulk or unpriced items, or ask for technical review when identification is unresolved. Call 011 079 6033, WhatsApp 079 508 0989 or email info@globseals.com.

Options & specifications

Typical focusCosmetics production
Main product familiesMechanical Seals, Metric O-rings, O-ring Kits, PTFE Gaskets and Seals
Buying modesBuy online, request a quote, technical review
Information to sendPart number, dimensions or drawing, medium, temperature, pressure, equipment details
AvailabilityConfirmed per enquiry

Options, materials and turnaround are confirmed on your written quote.

Frequently asked questions

Which O-rings resist fragrances and essential oils?

FKM and PTFE-based options are often considered, but results depend on the formulation. Confirm against the manufacturer's data for your products.

Can you supply O-rings for piston fillers?

Yes, send the filler make and model or the O-ring sizes. Product-contact parts go through technical review for documentation.

Do product-contact seals need documentation?

Yes. Product-contact parts require technical review and the correct certification documents, confirmed before you order.

Do you supply genuine or compatible parts?

You can enquire about genuine or compatible replacement parts for equipment from manufacturers such as Fristam, Burgmann, Freudenberg/Simrit and Trelleborg. The difference between the options is explained at quote stage so you can decide what suits your maintenance policy.

Request a quote for Cosmetics and Personal Care Manufacturing

Lead times are confirmed with your quote.
Print details
Clothing details
Branding positions (optional)
Sign details

Add a photo of the site or vehicle in the upload box below.

Poster details
Box details
Design or website details
Part details (if known)
Up to 5 files, 25 MB each. PDF, AI, EPS, SVG, PNG, JPG, TIFF, PSD, CDR or ZIP. Files are stored privately.

We use your details only to reply to this request. See our privacy policy.

Related services

Send your part numbers, dimensions or drawing and we will confirm the best buying route.

Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.