Seal identification
Mechanical Seal Replacement and Identification
Plenty of seals arrive with no nameplate, a worn marking or an unknown manufacturer. Globseals helps customers identify a mechanical seal from photos, dimensions and equipment details, then supply a genuine or compatible replacement. Where identification cannot be resolved, the enquiry moves to technical review rather than guesswork.
- Identify from photos
- Genuine or compatible options
- Technical review route
- Cartridge and component seals

The problem: wrong seal, wrong fit
Seals that look alike can differ in shaft size, seat arrangement, face materials, spring design and gland fit. Ordering by appearance alone risks a part that does not fit or that fails quickly in service. Original suppliers may be hard to reach, and older equipment may have been fitted with replacements of mixed origin.
What we do
We work from the information you provide to establish the seal type, size and materials, and recommend a replacement. Options may include genuine or compatible parts, and customers can enquire about replacements for equipment from manufacturers such as Burgmann, John Crane, Chesterton, Flowserve, Grundfos, KSB, Flygt and others. We do not claim to be a distributor of any manufacturer.
Browse mechanical seals, cartridge seals and component mechanical seals, or use find my seal to start. The right face and elastomer combination depends on the medium, temperature and pressure, so always confirm against the manufacturer's data. High-risk duties need technical review and the correct certification documents.
How the process works
How identification works
- Collect the information. Photograph the seal, gland and pump, and measure the shaft diameter.
- Send it to us. Share via the quote page, phone or WhatsApp with any part numbers or markings.
- Match and confirm. We match the seal to a replacement and confirm dimensions and materials with you.
- Buying route. Confirmed items can be bought or quoted; unresolved items go to technical review.
- Refit guidance. Installation points are shared to help avoid early failure.
What to send us
Helpful information includes:
- Photos of the seal from several angles, including the faces and any stamped numbers
- Shaft or sleeve diameter and the seal installed length if you can measure it
- Pump or equipment make, model and serial number
- Medium, temperature, pressure and rotating speed
- Whether you want a genuine or a compatible part
Use how to identify a mechanical seal to gather this information correctly, or ask us for help on 011 079 6033.
Related products and guides
Availability and capability
Capability is confirmed when you enquire. Identification depends on the quality of information received, and some seals cannot be matched without inspecting the part. No delivery or stock claims are made on this page; availability and pricing are quoted per enquiry. Phone 011 079 6033, WhatsApp 079 508 0989 or request a quote.
Options & specifications
| Common seal types | Cartridge, component, pusher, bellows |
|---|---|
| Replacement options | Genuine or compatible |
| Information needed | Photos, shaft size, equipment, medium, temperature, pressure |
| Buying modes | Buy online, request a quote, technical review |
| Capability | Confirmed when you enquire |
Options, materials and turnaround are confirmed on your written quote.
How ordering works
- 1
Collect the information
Photograph the seal, gland and pump, and measure the shaft diameter.
- 2
Send it to us
Share via the quote page, phone or WhatsApp with any part numbers or markings.
- 3
Match and confirm
We match the seal to a replacement and confirm dimensions and materials with you.
- 4
Buying route
Confirmed items can be bought or quoted; unresolved items go to technical review.
- 5
Refit guidance
Installation points are shared to help avoid early failure.
Frequently asked questions
Can you identify a seal from a photo?
Often a photo with dimensions and equipment details is enough to start. Where it is not, the enquiry goes to technical review.
What is the difference between genuine and compatible replacements?
Genuine parts come from the original manufacturer. Compatible parts are made to fit the same equipment by other makers. Both options can be discussed depending on your needs.
What if the seal has no markings?
Shaft size, pump model and photos of the faces and gland are usually used to narrow it down. Technical review is available.
Do I need to know the medium?
Yes. The medium, temperature and pressure drive face and elastomer selection, and are needed for any recommendation.
Can I buy online?
Where confirmed items appear in the shop you can buy online. Otherwise request a quote.
Request a quote for Mechanical Seal Replacement and Identification
Related services
Mechanical Seal RepairsA leaking mechanical seal does not always need a full replacement. Depending on the design and the damage,…View
Mechanical SealsA mechanical seal controls leakage where a rotating shaft passes through a stationary housing, most often on centrifugal…View
Cartridge SealsA cartridge seal is a complete mechanical seal assembled by the manufacturer on a sleeve and gland plate,…View
Find My SealIf you do not have a part number, dimensions are the next best route. Tell us the type…View - How to Identify a Mechanical SealMechanical seals come in many designs, and the part number is often worn off or never visible. This…View
Pumps and Pump SparesGlobseals supplies pump spares and, on enquiry, pumps for water, process and general industrial duty. Pump spares are…View
Custom Gasket ManufacturingWhen a flange, cover or housing has no off-the-shelf gasket, a custom-made part is the practical answer. Globseals…View
Gasket Cutting and Material ConversionMany maintenance teams buy sheet material and need it turned into usable parts: gaskets, washers, discs, strips and…View
Send photos and shaft size to identify your mechanical seal.
Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.
