Fleet workshops
Seals and Workshop Supplies for Transport and Fleet Maintenance
Truck, bus and trailer fleets keep vehicles earning by turning repairs around quickly. Workshops need the right oil seals, air system seals, hydraulic kits, O-rings and fittings without guessing. Globseals supports fleet workshops and transport operators with sealing parts and related workshop consumables, and helps identify parts from numbers, samples or measurements.
- Hub and diff oil seals
- Air brake system seals
- Tipper and tail lift kits
- Workshop O-ring kits

Sealing challenges in transport and fleet maintenance
Fleet workshops see the same sealing faults again and again:
- Wheel hub, differential and gearbox oil seals that leak and contaminate brakes
- Air brake and suspension system leaks from worn valve seals and fittings
- Tipper hoists, tail lifts and loader cranes with leaking or drifting cylinders
- Fuel tanker valves and couplings where seal material must suit the fuel
- Vibration loosening fittings and wearing bonded seals and O-rings
- Many vehicle models, which makes keeping the right sizes on the shelf difficult
Relevant product families
These product families are commonly enquired about in this sector. Open any page for sizes, materials and buying options.
- Rotary Shaft and Oil Seals: Oil seals for hubs, differentials, gearboxes and PTOs.
- Pneumatic Seals: Seals for air cylinders and pneumatic actuators.
- Hydraulic Seals: Kits for tippers, tail lifts and cranes.
- O-ring Kits: Metric and imperial O-ring kits for workshops.
- Bonded Seals: Bonded seals for hydraulic and fuel fittings.
- Circlips, E-clips and Retaining Rings: Retaining rings for workshop repairs.
- Hoses and Fittings: Hoses and fittings for hydraulic and air lines.
- Sealants and Industrial Adhesives: Sealants and adhesives for workshop use.
You can also browse all product categories or the online shop, where products are being added.
How to select the right part
Oil seals are selected by shaft size, bore, width and lip design, with the elastomer chosen for oil type and temperature. For fuel duties, compound choice depends on the fuel and any additives; FKM is often considered, but always confirm against the manufacturer's data for your application. Air brake components are safety-critical, so use the parts specified by the vehicle or component maker and route uncertain items to technical review.
Information that speeds up a correct recommendation:
- Vehicle make, model and component (hub, diff, gearbox, cylinder)
- Seal size code or measured shaft, bore and width
- Fluid: gear oil, hydraulic oil, fuel or air
- Existing part numbers from the old seal or kit
Technical and identification support
Most oil seals carry a size code on the face, which, with the shaft size, is usually enough to identify a replacement. For cylinders, send rod, bore and groove measurements. Unknown parts can be sent in for identification.
You can also use find my seal, upload a drawing, or see how our technical support works.
Procurement and ordering
Workshops with regular demand can ask about trade accounts and supply agreements for common sizes and kits. We can also quote assortment kits to keep on the shelf. Courier costs are quoted per order and availability is confirmed per enquiry.
Globseals offers three ways to buy: buy online where a confirmed price is shown, request a quote for custom, bulk or unpriced items, or ask for technical review when identification is unresolved. Call 011 079 6033, WhatsApp 079 508 0989 or email info@globseals.com.
Options & specifications
| Typical focus | Fleet workshops |
|---|---|
| Main product families | Rotary Shaft and Oil Seals, Pneumatic Seals, Hydraulic Seals, O-ring Kits |
| Buying modes | Buy online, request a quote, technical review |
| Information to send | Part number, dimensions or drawing, medium, temperature, pressure, equipment details |
| Availability | Confirmed per enquiry |
Options, materials and turnaround are confirmed on your written quote.
Frequently asked questions
Can you supply truck hub oil seals?
Yes, send the seal marking or the shaft, bore and width plus the vehicle details, and we will quote matching or compatible seals.
Do you supply O-ring kits for workshops?
We can quote metric and imperial O-ring kits as well as bonded seal and retaining ring assortments.
Can you help with tipper hoist cylinder seals?
Send the hoist make and model or cylinder dimensions and we will quote a seal kit or individual seals.
Do you offer trade accounts for fleet workshops?
Trade accounts are available to qualifying businesses. See our trade accounts page for how to apply.
Request a quote for Transport and Fleet Maintenance
Related services
Rotary Shaft and Oil SealsRotary shaft seals, commonly called oil seals, keep lubricant in and contaminants out where a rotating shaft passes…View
O-ring KitsAn O-ring kit is a boxed assortment of common sizes in one compound, designed so that a maintenance…View
Bonded SealsA bonded seal is a metal washer with an elastomer sealing ring vulcanised to its inside edge. It…View
Pneumatic SealsPneumatic seals work in compressed-air systems, where the medium is a gas, pressures are lower than in hydraulics…View
Trade AccountsIf your business buys sealing products, pumps or spares regularly, a trade account can streamline ordering. This page…View
Construction and Earthmoving EquipmentExcavators, TLBs, loaders, graders, cranes and rock breakers depend on hydraulic cylinders that work in mud, dust and…View
Rail and Rolling StockLocomotives, wagons, coaches and track maintenance machines run long distances between services, in dust, vibration and wide temperature…View
Automotive ManufacturingAutomotive plants run press lines, robotic cells, test benches and assembly tools that depend on hydraulic and pneumatic…View
Send your part numbers, dimensions or drawing and we will confirm the best buying route.
Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.
