Bedfordview, Johannesburg+27 79 057 6815+27 78 336 3011

Precious metals

Seals and Spares for Gold and Platinum Processing Plants

Gold and platinum group metal plants run milling, flotation, leaching, elution and refining circuits that combine abrasive slurries with hazardous and corrosive chemistry. Seal failures can mean lost recovery, spillage and safety risk. Globseals helps metallurgical plant maintenance teams source mechanical and cartridge seals, packing, seal support systems, gaskets and pump and valve spares.

  • Mill and cyclone feed pumps
  • Leach tank agitator seals
  • Elution and acid duties
  • Seal support systems
Seals and Spares for Gold and Platinum Processing Plants

Sealing challenges in gold and platinum processing plants

Typical sealing challenges in gold and PGM processing include:

  • Mill discharge and cyclone feed pumps handling dense, abrasive slurry
  • CIL and CIP leach tank agitators, where cyanide solutions must be contained
  • Flotation circuits with reagents, froth and high solids
  • Elution columns and heat exchangers running hot caustic and cyanide solutions
  • Base metal and precious metal refinery leaches with strong acids, high temperatures and, in some circuits, oxygen under pressure
  • Tailings and thickener underflow pumps on long pipelines

Relevant product families

These product families are commonly enquired about in this sector. Open any page for sizes, materials and buying options.

You can also browse all product categories or the online shop, where products are being added.

How to select the right part

Slurry duties typically call for hard face combinations and a reliable flush or quench, while leach and refinery duties are driven by chemical compatibility and containment. These are typical starting points only; always confirm against the manufacturer's data for your application.

Cyanide, strong acid and oxygen-enriched or pressure-leach duties require technical review, and the correct certification documents where oxygen service or your site rules require them, before any part is supplied.

Information that speeds up a correct recommendation:

  • Circuit and stream: slurry, cyanide solution, eluate or acid leach
  • Solids content, pH, temperature and pressure
  • Pump or agitator make, model and seal arrangement
  • Flush, quench or barrier fluid availability

Technical and identification support

Send the pump or agitator details, the existing seal drawing or number and photos of failed parts. Repairable seals can be reviewed through our mechanical seal repairs service, and pumps through pump repairs and refurbishment, with capability confirmed when you enquire.

You can also use find my seal, upload a drawing, or see how our technical support works.

Procurement and ordering

Processing plants combine critical spares, breakdown items and planned shutdown kits. We can quote a shutdown list in one document and discuss inventory management and supply agreements. Availability is confirmed per enquiry.

Globseals offers three ways to buy: buy online where a confirmed price is shown, request a quote for custom, bulk or unpriced items, or ask for technical review when identification is unresolved. Call 011 079 6033, WhatsApp 079 508 0989 or email info@globseals.com.

Options & specifications

Typical focusPrecious metals
Main product familiesMechanical Seals, Cartridge Seals, Seal Support and Supply Systems, Compression Packing
Buying modesBuy online, request a quote, technical review
Information to sendPart number, dimensions or drawing, medium, temperature, pressure, equipment details
AvailabilityConfirmed per enquiry

Options, materials and turnaround are confirmed on your written quote.

Frequently asked questions

Can you supply seals for CIL agitators?

We can quote agitator seals once the agitator make, shaft size and duty are known. Cyanide duties go through technical review.

Do you supply cartridge seals for slurry pumps?

Yes, send the pump make and model, slurry details and flush arrangement for a quote.

Can you help with refinery acid duties?

Send the acid, concentration, temperature and pressure. Acid and pressure-leach duties require technical review before any recommendation.

Do you supply genuine or compatible parts?

You can enquire about genuine or compatible replacement parts for equipment from manufacturers such as Burgmann, John Crane, Chesterton, Flowserve and KSB. The difference between the options is explained at quote stage so you can decide what suits your maintenance policy.

Request a quote for Gold and Platinum Processing Plants

Lead times are confirmed with your quote.
Print details
Clothing details
Branding positions (optional)
Sign details

Add a photo of the site or vehicle in the upload box below.

Poster details
Box details
Design or website details
Part details (if known)
Up to 5 files, 25 MB each. PDF, AI, EPS, SVG, PNG, JPG, TIFF, PSD, CDR or ZIP. Files are stored privately.

We use your details only to reply to this request. See our privacy policy.

Related services

Send your part numbers, dimensions or drawing and we will confirm the best buying route.

Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.