Bedfordview, Johannesburg+27 79 057 6815+27 78 336 3011

Municipal water

Seals and Spares for Municipal Water Supply and Pumping Stations

Bulk water supply depends on raw water intakes, high-lift pumps, booster stations, reservoirs and long pipelines with large valves. Leaking glands, failed pump seals and weeping flanges waste treated water and energy. Globseals helps municipalities, water boards and their contractors source packing, mechanical seals, gaskets, valve spares and pump spares.

  • Split-case pump packing
  • Large flange gaskets
  • Sluice and butterfly valve spares
  • Leakage reduction
Seals and Spares for Municipal Water Supply and Pumping Stations

Sealing challenges in municipal water supply and pumping stations

Typical sealing challenges in municipal water infrastructure include:

  • Large split-case and vertical turbine pumps where packed glands leak more than they should
  • Ageing pumps and valves without documentation or nameplates
  • Large-diameter flanged joints, dismantling joints and couplings that weep after maintenance
  • Sluice, gate, butterfly and air valves with worn seats and seals
  • Sewage pump stations with submersible pumps facing grit and rags
  • Remote stations where a second visit for the wrong part is costly

Relevant product families

These product families are commonly enquired about in this sector. Open any page for sizes, materials and buying options.

You can also browse all product categories or the online shop, where products are being added.

How to select the right part

Packing selection depends on shaft speed, pressure and water quality, and many pumps run better when glands are correctly adjusted rather than over-tightened. Converting packed pumps to mechanical seals is possible on some designs and needs a review of the pump. EPDM is often considered for water, but always confirm against the manufacturer's data for your application.

Parts in contact with drinking water require technical review and the correct certification documents. Tell us at enquiry which parts are in potable water service.

Information that speeds up a correct recommendation:

  • Pump make, model, shaft size and stuffing box dimensions
  • Valve type, size and pressure class
  • Flange size, drilling standard and pressure class
  • Whether the water is raw, treated or potable

Technical and identification support

Where plant has no documentation, measured stuffing box bore, shaft size and depth allow packing to be specified. For flanges, record nominal size, drilling standard and class. Our water saving and leakage audits service may help identify where water is being lost, confirmed when you enquire.

You can also use find my seal, upload a drawing, or see how our technical support works.

Procurement and ordering

Municipal procurement usually requires formal quotes against a list, so send the full schedule with quantities and we will quote it as one document. Supply agreements can be discussed for repeat items. Availability and documentation are confirmed per enquiry.

Globseals offers three ways to buy: buy online where a confirmed price is shown, request a quote for custom, bulk or unpriced items, or ask for technical review when identification is unresolved. Call 011 079 6033, WhatsApp 079 508 0989 or email info@globseals.com.

Options & specifications

Typical focusMunicipal water
Main product familiesCompression Packing, Mechanical Seals, Pumps and Pump Spares, Valves and Valve Spares
Buying modesBuy online, request a quote, technical review
Information to sendPart number, dimensions or drawing, medium, temperature, pressure, equipment details
AvailabilityConfirmed per enquiry

Options, materials and turnaround are confirmed on your written quote.

Frequently asked questions

Can you supply packing for large split-case pumps?

Yes, send the shaft size, stuffing box bore and depth and the pump details, and we will quote suitable packing.

Are your gaskets suitable for potable water?

Potable water parts require technical review and the correct certification documents, confirmed at quote stage before any order.

Can you quote against a municipal tender schedule?

Send the schedule and specifications. We quote line by line and flag any items that need technical review.

Do you supply genuine or compatible parts?

You can enquire about genuine or compatible replacement parts for equipment from manufacturers such as KSB, Flygt, Sulzer and Grundfos. The difference between the options is explained at quote stage so you can decide what suits your maintenance policy.

Request a quote for Municipal Water Supply and Pumping Stations

Lead times are confirmed with your quote.
Print details
Clothing details
Branding positions (optional)
Sign details

Add a photo of the site or vehicle in the upload box below.

Poster details
Box details
Design or website details
Part details (if known)
Up to 5 files, 25 MB each. PDF, AI, EPS, SVG, PNG, JPG, TIFF, PSD, CDR or ZIP. Files are stored privately.

We use your details only to reply to this request. See our privacy policy.

Related services

Send your part numbers, dimensions or drawing and we will confirm the best buying route.

Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.