Refurbishment
Equipment Refurbishment
Refurbishing equipment can extend its working life when new units are costly or slow to arrive. Globseals supports customers with refurbishment enquiries for pumps, valves and other rotating or fluid-handling equipment, bringing together seals, gaskets, spares and machining support under one enquiry.
- Pumps, valves, rotating equipment
- Seals and spares supply
- Machining support
- Scoped per enquiry

The problem: ageing equipment and unclear scope
Equipment that has run for years usually has worn seals, scored shafts, damaged gaskets and tired spares. Without a clear inspection, refurbishment budgets drift. Parts are ordered piecemeal, and the unit is back in service only to fail again at the next weak point.
What we do
We help define the scope of a refurbishment and source what it needs. Typical items include seals and packing, gaskets, O-rings, bearings, sleeves and other wear components. See pumps and pump spares, valves and valve spares, mechanical seals and compression packing.
Where parts must be remade, metal machining support is available on enquiry. Customers can ask about genuine or compatible replacement parts for equipment from manufacturers such as KSB, Grundfos, Flowserve, Sulzer and others. Material suitability depends on the duty and must be confirmed against the manufacturer's data.
How the process works
How a refurbishment enquiry works
- Describe the equipment. Provide make, model, age and the reason for refurbishment.
- Share inspection findings. Photos, wear measurements and failed parts help define scope.
- Build the parts list. We list the seals, gaskets and spares probably needed and identify any machining.
- Quotation. The parts and any support are quoted per enquiry.
- Reassembly guidance. Fitting and alignment points are shared to protect the new components.
What to send us
Helpful information:
- Equipment make, model and serial number from the nameplate
- Photos of the equipment, wear areas and damaged parts
- Medium, temperature, pressure and duty cycle
- Any existing manuals, exploded drawings or part lists
- Priority: restore as original, or upgrade materials for the duty
See the pump and seal maintenance guide for practical checks during dismantling.
Related products and guides
Availability and capability
Capability is confirmed when you enquire. Equipment type, size, condition and parts availability all affect scope. No turnaround, workshop capacity or on-site availability is promised on this page; these are confirmed per enquiry. Phone 011 079 6033, WhatsApp 079 508 0989 or request a quote.
Options & specifications
| Equipment types | Pumps, valves, rotating and fluid equipment |
|---|---|
| Typical inputs | Make, model, photos, inspection findings |
| Support | Seals, gaskets, spares, machining |
| Pricing | Quoted per enquiry |
| Capability | Confirmed when you enquire |
Options, materials and turnaround are confirmed on your written quote.
How ordering works
- 1
Describe the equipment
Provide make, model, age and the reason for refurbishment.
- 2
Share inspection findings
Photos, wear measurements and failed parts help define scope.
- 3
Build the parts list
We list the seals, gaskets and spares probably needed and identify any machining.
- 4
Quotation
The parts and any support are quoted per enquiry.
- 5
Reassembly guidance
Fitting and alignment points are shared to protect the new components.
Frequently asked questions
What equipment can be refurbished?
Pumps, valves and rotating equipment are the most common enquiries. Whether a given unit can be handled is confirmed when you enquire.
Can you supply only the parts?
Yes. Parts-only supply is a common route when your own team does the work.
Is refurbishment better than replacement?
It depends on cost, spares availability and condition. Sharing details lets you compare options.
Can materials be upgraded during refurbishment?
Material upgrades can be discussed. Any change must be confirmed against the manufacturer's data for the application.
How is the work priced?
Pricing is quoted per enquiry after scope and parts are established.
Request a quote for Equipment Refurbishment
Related services
- Pump Repairs and RefurbishmentPumps are the heart of many plants, and a failed pump quickly becomes a production problem. Globseals supports…View
Metal MachiningWorn shafts, damaged sleeves and obsolete parts are common reasons equipment stays down. Globseals supports customers with metal…View
Pumps and Pump SparesGlobseals supplies pump spares and, on enquiry, pumps for water, process and general industrial duty. Pump spares are…View
Valves and Valve SparesValves control, isolate or protect pipework, and their sealing parts, namely stem packing, seats, body gaskets and O-rings,…View - Pump and Seal Maintenance GuideGood maintenance extends seal life and reduces unplanned stops. This guide offers a general routine for pumps and…View
- Planned Maintenance and Reliability SupportReliability starts with knowing which components fail, why, and what to hold ready. Globseals can discuss planned maintenance…View
Custom Gasket ManufacturingWhen a flange, cover or housing has no off-the-shelf gasket, a custom-made part is the practical answer. Globseals…View
Gasket Cutting and Material ConversionMany maintenance teams buy sheet material and need it turned into usable parts: gaskets, washers, discs, strips and…View
Send your equipment details to scope a refurbishment.
Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.
