Bedfordview, Johannesburg+27 79 057 6815+27 78 336 3011

Identify a seal

Find my seal

If you do not have a part number, dimensions are the next best route. Tell us the type of seal and the measurements below and we will help match it. Where it cannot be resolved from measurements, we offer technical review.

  • No part number needed
  • Measure and send
  • Technical review
Find my seal

O-rings

Measure the inside diameter and the cord (cross-section) diameter, and note the unit. If it is in a groove, also send the groove dimensions. See How to Measure an O-ring and Metric O-rings.

Oil and rotary shaft seals

Send shaft diameter, housing bore diameter and seal width, plus lip type if known. See Rotary Shaft and Oil Seals.

Hydraulic seals

Send bore and rod diameters, groove width, groove depth, and the seal type (piston, rod, wiper, guide ring). See How to Measure a Hydraulic Seal.

Mechanical seals

Send shaft or sleeve diameter, pump make and model, seal face and elastomer materials if known, and any nameplate details. See How to Identify a Mechanical Seal.

Gaskets

Send flange standard and size, pressure class, bolt hole pattern, thickness and the medium. See Understanding Gasket Dimensions and Flange Details.

Always include

Medium, temperature, pressure, quantity and photos. Material suggestions from us are general and must be confirmed against the manufacturer's data for your application.

How ordering works

  1. 1

    Identify the type

    O-ring, oil seal, hydraulic seal, mechanical seal or gasket.

  2. 2

    Measure

    Record the dimensions listed above in a stated unit.

  3. 3

    Add conditions

    Medium, temperature, pressure and quantity.

  4. 4

    Send

    Submit with photos; we respond with a match or follow-up questions.

Frequently asked questions

What if I only have a broken seal?

Measure what you can and send photos of all sides.

Which unit should I use?

Either metric or imperial, as long as you state which.

Can you match an old seal to a new brand?

We can enquire about compatible replacements; suitability is confirmed per application.

What if measurements do not match any standard?

Request technical review or a custom item.

Explore

Send your measurements and we will help match the seal.

Send your brief, quantities and deadline. We reply with a clear written quote and confirm the turnaround before anything goes to production.